Framed Inlet Doors
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
VAL-CO Framed Inlet Doors are foam insulted with flexible door seals and a full-length polymer hinge. They direct the air up along the ceiling for smooth air circulation. Inlet doors are available in 12″ section, continuous 8′ sections, or custom lengths.
Features & Benefits
- Foam insulated, Flexible door seals, full-length polymer hinge
- Direct air along the ceiling for smooth air circulation
Options
- 12″ length
- Custom lengths
- Continuous 8′ sections to run length of house
Tunnel Inlet Doors
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
VAL-CO Tunnel Inlet Doors have seven times the insulation value of curtains. The continuous hinge is reinforced with stainless steel for durability. An extra large continuous top seal eliminates drafts and pushes air up along the ceiling.
Features & Benefits
- Seven times the insulation value of curtains
- Continuous hinge reinforced with stainless steel
- Extra large continuous top seal to eliminate drafts
Options
- Continuous installation or install between knee braces
Hemisphere Z-Pro Fan
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
The Hemisphere Z-Pro Fan has a low 12″ profile to fit perfectly in low-clearance ceilings. Its large diameter and slow rotation won’t disturb livestock, but still moves a large volume of air to reduce temperature stratification, improve heat distribution, and eliminate dead spots.
Features & Benefits
- Low 12″ profile fits perfectly on low-clearance ceilings.
- Large diameter and slow rotation for quiet operation that doesn’t disturb livestock.
- Moves a large volume of air to reduce temperature variation.
- Improves heat distribution and eliminates dead spots.
Directional Hemisphere Fan
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
The Directional Hemisphere’s unique design reduces temperature variation by moving large volumes of air without interfering with the incoming air during minimum ventilation. It reduces drafts and cold zones by mixing warm house air with fresh air. The low profile makes it ideal for use in layer pullet, layer, and floor bird houses.
Features & Benefits
- Low profile makes it ideal for use in layer pullet, layer, and floor bird houses
- Unique design reduces temperature variation by moving large amounts of air
- Reduces drafts and cold zones by mixing warm house air with cold air during minimum ventilation
Circulating Fans
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
Circulation fans help to stabilize air temperatures and improve heating efficiency in cooler weather. Likewise, they work to increase air speed and promote bird cooling in warmer weather. The PVC-coated wire screen prevents rust to extend the life of the fan. Can be mounted to ceilings, walls, and trusses.
Features & Benefits
- Help to stabilize air temperatures and improve heating efficiency
- PVC-coated weld wire screen to prevent rust
- Can be mounted to ceilings, walls, or trusses
Options
- 20′, 24″, 36″
- 1 phase and 3 phase available
Z-Fans
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
Z-Fans are the most rust-resistant metal fans on the market. Made with a proprietary blended coating, Z-Fans are self-healing and last years longer than galvanized fans. All Z-Fan models come with a 7-year warranty when used in poultry operations. Damper and slantwall models available.
Features & Benefits
- Made from a proprietary blended coating that is more resistant to corrosion than galvanized steel and more cost effective than fiberglass
- Features the same performance and reliability of our galvanized fans with a long life span.
- Get a 7 year warranty when used in poultry operations.
Options
- Damper fan sizes: 48″ & 54″
- Slant wall fan sizes: 36″, 48″, & 54″
The V-Fan
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
The VAL-CO V-Fan™ is a variable speed, direct drive fan that provides higher total CFM at full speed as well as remarkably high CFM/Watt measurements at low speeds. During minimum ventilation, it’s more efficient to use a 54” V-Fan running at low speed than a standard 36” fan running at full speed. A 54” V-Fan at 50% speed can move 13,400 CFM at .05” SP while achieving 53.8 CFM/Watt. That is more than a 300% increase in efficiency!
Features & Benefits
- Delivers high CFM at top speeds
- Provides high CFM/Watt at low speeds
- Direct drive motor means less maintenance
- Available in 1-Phase and 3-Phase, 200-230V input options.
Available sizes
- 54″
- 50″
- 36″
HyperMAX Fiberglass Fans
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
HyperMAX Fiberglass Fans are the most durable fans available. Molded fiberglass housing won’t rust. The poly cone can withstand the impact of the elements. The optimized use of the motor’s power curve makes them both powerful and energy efficient.
Features & Benefits
- Corrosion-resistant, molded fiberglass housing.
- Optimized use of motor’s power curve.
- Sealed ball bearing and thermal overload protection.
- Exhaust cones available in fiberglass or poly.
Available sizes
- 36″
- 50″
- 54″
ATLAS Curtain Machine
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
The ATLAS Curtain Machine is designed to withstand the elements and comes with additional weather protection covers. It can easily lift up to 4000 pounds and has built in safety features to prevent overrun damage.
Features & Benefits
- Easily lifts up to 4000 pounds
- Safety features prevent overrun damage
Options
- Models available in ball screw or acme screw
- 24″
- 36″
- 48″
- 72″
SafeTRAC Gen III Curtain Machine
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
The SafeTRAC Gen III curtain machine is designed for in-house use and can easily lift up to 4000 pounds. Local control switches and an interlock switch make sure that all associated equipment are operating on command.
Features & Benefits
- Easily lifts up to 4000 pounds
Options
- Swivel chain and sprocket to replace pulleys
- Local control switches
- 10-turn potentiometer feedback kit
- Interlock switch to operate associated equipment
HyperMAX Galvanized Fans
<"https://dev.val-co.com/wp-content/uploads/2021/05/FPO-1980x1571-CC.png">
HyperMAX Galvanized Fans offer easy maintenance and great energy efficiency. VAL-CO Galvanized Fans use a standard belt tensioner, efficient motors, a 4-point motor mount, and a slant wall design for easy cleaning. Available in a damper fan model.
Features & Benefits
- Reduced maintenance with standard belt tensioner
- Energy-efficient, water-resistant motors
- Minimum air restriction with 4-point galvanized motor mount
- Slant wall design makes for easy cleaning
Available Sizes
- 36″
- 48″
- 54″
Blade Options
- Galvanized